Hi Norman
Still having trouble trying to get Tabber to work have followed the instructions . The only thing noticeable ' The Tabbed Descriptions' and 'Tabbed Description Split' were already in list.
the site has been uploaded if you need to take a look see here http://www.chmarine.com/acatalog/Garmin ... 35_04.html
Cannot get Tabber to Work in SD 2013
Re: Cannot get Tabber to Work in SD 2013
Double-check that you've done this bit from the ReadMe:
Click the Design tab and then the "Actinic Stylesheet" (in V11.03 onwards the "Current Stylesheet") button.
Paste the following line into the bottom of the layout after everything else:
<actinic:variable name="TabberStyle" />
Click the Design tab and then the "Actinic Stylesheet" (in V11.03 onwards the "Current Stylesheet") button.
Paste the following line into the bottom of the layout after everything else:
<actinic:variable name="TabberStyle" />
Norman
Re: Cannot get Tabber to Work in SD 2013
Hi Norman
yes ,we did this and it turned into ' TabberStyle ' clickable shortcut
yes ,we did this and it turned into ' TabberStyle ' clickable shortcut
Re: Cannot get Tabber to Work in SD 2013
Not sure what you mean by "it turned into ' TabberStyle ' clickable shortcut". Do you mean it displayed in red and underlined?
If so, there's no sign of the code at the bottom of actinic.css on your live site. Double-check it's there.
Also check that you've selected something under Settings / Site Options / Layout / Tabbed Descriptions / Tabbed Descriptions Style.
If so, there's no sign of the code at the bottom of actinic.css on your live site. Double-check it's there.
Also check that you've selected something under Settings / Site Options / Layout / Tabbed Descriptions / Tabbed Descriptions Style.
Norman
Re: Cannot get Tabber to Work in SD 2013
Hi Norman
Yes ! It is red and is underlined and we have selected a Tabber Style.
We have also refreshed the website but no luck .
Any other ideas ?
Yes ! It is red and is underlined and we have selected a Tabber Style.
We have also refreshed the website but no luck .
Any other ideas ?
Re: Cannot get Tabber to Work in SD 2013
Look in Settings / Site Options / Layout / Tabbed Descriptions / Tabbed Descriptions Style. Note down the value.
Now look in Design / Library / Layout / TabbedDescriptions / <value from above>
If you see many lines of code then all is as it should be and your problem is inexplicable. If code's in a Layout and that layout has been put into the Current Stylesheet, then that code should show up in the generated actinic.css.
Perhaps you have a faulty SD installation or someone's customised your site (not me) in an unusual way.
Now look in Design / Library / Layout / TabbedDescriptions / <value from above>
If you see many lines of code then all is as it should be and your problem is inexplicable. If code's in a Layout and that layout has been put into the Current Stylesheet, then that code should show up in the generated actinic.css.
Perhaps you have a faulty SD installation or someone's customised your site (not me) in an unusual way.
Norman
Re: Cannot get Tabber to Work in SD 2013
Yes ! Checked as you said and many lines of code showing . We will check on the customisation .
Thanks for now
Thanks for now
Re: Cannot get Tabber to Work in SD 2013
You can also put some dummy benign code into the bottom of Current Stylesheet. E.g.
Then upload and see if that line appears in the generated actinic.css.
Code: Select all
.chtesting {}
Norman
Re: Cannot get Tabber to Work in SD 2013
The Tabber code has just shown up in your line actinic.css stylesheet. However I see other problems.
Go to Design / Library / Layouts / JavaScript Header Functions / Standard Javascript Header Functions and make sure that you have only one Tabber Setup line (I see 2).
I would recommend putting the Tabber Setup line above any lines for Multi Product Images and Dynamic Choice Images.
If unsure, post your Standard Javascript Header Functions here so I can see what you've got.
Go to Design / Library / Layouts / JavaScript Header Functions / Standard Javascript Header Functions and make sure that you have only one Tabber Setup line (I see 2).
I would recommend putting the Tabber Setup line above any lines for Multi Product Images and Dynamic Choice Images.
If unsure, post your Standard Javascript Header Functions here so I can see what you've got.
Norman